SMC Networks 2555W-AG Скачать руководство пользователя страница 220

Страница: 220 / 260

Command Line Interface

6-92

wpa-mode

This command specifies whether Wi-Fi Protected Access (WPA)
is to use 802.1x dynamic keys or a pre-shared key.

Syntax

wpa-mode

dynamic

pre-shared-key

•

dynamic

- WPA with 802.1x dynamic keys.

•

pre-shared-key

- WPA with a pre-shared key.

Default Setting

dynamic

Command Mode

Interface Configuration (Wireless)

Command Usage

• When the WPA mode is set to “dynamic,” clients are

authenticated using 802.1x via a RADIUS server. Each
client has to be WPA-enabled or support 802.1x client
software. A RADIUS server must also be configured and be
available in the wired network.

• In the dynamic mode, keys are generated for each wireless

client associating with the access point. These keys are
regenerated periodically, and also each time the wireless
client is re-authenticated.

• When the WPA mode is set to “pre-shared-key,” the key

must first be generated and distributed to all wireless clients
before they can successfully associate with the access point.

Example

Related Commands

wpa-clients (page 6-90)
wpa-preshared-key (page 6-93)

SMC-AP(if-wireless g)#wpa-mode pre-shared-key
SMC-AP(if-wireless g)#

Содержание 2555W-AG





































































































































































































































































Результаты поиска

Содержание 2555W-AG

Отзывы:

Бренды по названию

Популярные бренды

SMC Networks 2555W-AG, Руководство пользователя

Результаты поиска

Содержание 2555W-AG

Отзывы:

Бренды по названию

Популярные бренды