SMC Networks 2555W-AG Скачать руководство пользователя страница 14

Страница: 14 / 260

OMPLIANCES

Important!

Before making connections, make sure you have the correct cord set.

Check it (read the label on the cable) against the following:

Power Cord Set

U.S.A. and
Canada

The cord set must be UL-approved and CSA certified.

The minimum specifications for the flexible cord are:
- No. 18 AWG - not longer than 2 meters, or 16 AWG.
- Type SV or SJ
- 3-conductor

The cord set must have a rated current capacity of at least
10 A

The attachment plug must be an earth-grounding type with
NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V)
configuration.

Denmark

The supply plug must comply with Section 107-2-D1,
Standard DK2-1a or DK2-5a.

Switzerland

The supply plug must comply with SEV/ASE 1011.

U.K.

The supply plug must comply with BS1363 (3-pin 13 A) and
be fitted with a 5 A fuse which complies with BS1362.

The mains cord must be <HAR> or <BASEC> marked and
be of type HO3VVF3GO.75 (minimum).

Europe

The supply plug must comply with CEE7/7 (“SCHUKO”).

The mains cord must be <HAR> or <BASEC> marked and
be of type HO3VVF3GO.75 (minimum).

IEC-320 receptacle

Содержание 2555W-AG





































































































































































































































































Результаты поиска

Содержание 2555W-AG

Отзывы:

Бренды по названию

Популярные бренды

SMC Networks 2555W-AG, Руководство пользователя

Результаты поиска

Содержание 2555W-AG

Отзывы:

Бренды по названию

Популярные бренды