TECHNICAL INFORMATION
TRAMPOLINE S
If you have any questions, we’d be happy to help:
smb Seilspielgeräte GmbH Berlin in Hoppegarten
Fon.
+49 (0) 3342 50837-20
Technikerstraße 6/8
Fax.
+49 (0) 3342 50837-80
www.smb.berlin
DE-15366 Hoppegarten
09.04.2020
Page 5 von 9
2.2 Removal and re-mounting of the jump mat
The DURAPTEQ
®
springs can be released from the jump mat suspension using the provided tool (Figures 3
an 4). To do so the hook of the fixing tool is hung in the hook notch of the spring and slowly pulled using the
rope attached to it. Once the appropriate extension of the spring has been achieved, the fastening links (chain
links) that are secured on two sides of the jump mat fall independently downwards. These fastening links
(thimbles) on the other two sides of the jump mat must be pushed out downwards once the springs have been
extended. These do not fall independently out of the spring suspension.
The jump mat is hung in position following the same procedure, but in reverse. The only difference is that the
extended springs must be hooked by hand into the fastening link (chain link or thimble).
Fig. 3
Removal and re-mounting of the jump mat
