
Technical Information
Trampoline „S“
Page 3
How to suspend the jumping mat:
•
Tighten the springs
•
Suspended the eyes
•
Release the springs
Maintenance instructions EN 1176-1
Routine visual inspection
The frequency of this inspection depends on local conditions (high/low usage, vandalism, air
contamination, effects of the weather).
Operational inspection (every 6 months)
•
Check toy for general damage or wear and tear.
•
Check condition of the jumping mat, spring suspensions and protective panels.
Main inspection
The trampoline framework consists of galvanised sheets, 4 mm thick. In view of this fact, a main
inspection, which then includes checking the framework for corrosion, only needs to be carried out every
two years.
Notice to the type label
The type label is placed in the middle of the side panel. It is fixed there at the inner side. It could be
necessary to remove the jumping mat (see page 2 and 3, removal/assembly of the jumping mat), to
read the type label (producer, model, test number, TÜV-seal).
smb
Seilspielgeräte GmbH Berlin
Handwerkerstraße 7
15366 Hoppegarten
Germany
Phone ++49 (0)3342 5 08 37 20
Fax ++49(0)3342 5 08 37 80