Technical Information
Trampoline „S“
Page 2
Assembly
The trampoline is erected after the ground has been
excavated (450 mm deep, size according to number
of trampolines) and an even horizontal surface
created. If there is a bad grown situation (e.g. loamy
soil) we recommend a drainage layer.
Boreholes (sealed with stoppers), which are for the
four supporting iron rings supplied (close boreholes
again!), are located on the sides. One must ensure
that the framework is lying snug and does not wobble.
This can be checked simply by standing on it. The
play level is to be remade by filling in appropriately
Removal and/or assembly of the jumping mat
The trampoline is supplied complete with suspended jumping mat. The jumping mat must only be
removed when damaged or cleaning the trampoline
Using the tool supplied, the springs can be loosened from the suspended net from the top (Figure 3). To
do this, the hock is suspended in the eye of the tension spring which opens from the bottom and slowly
pulled onto the rope which is fastened onto the hook. If the spring extends enough, then the eye, which is
suspended on the jumping mat, falls down automatically.
Figure 2
Figure 3
smb
Seilspielgeräte GmbH Berlin
Handwerkerstraße 7
15366 Hoppegarten
Germany
Phone ++49 (0)3342 5 08 37 20
Fax ++49(0)3342 5 08 37 80