SMB GFI EXINDA 4062V2, Быстрый старт

Страница: 5 / 5

0.2.2 Using a Monitor and keyboard to Access the Command Line Interface
1.
Plug a keyboard and a monitor to your Exinda Appliance.
2. Optionally: connect a Cisco compatible serial cable to the RJ45 serial port (upper left port).
3.
To access the Exinda appliance via serial console, use your preferred terminal software (such as HyperTerm) with the following set-
tings:
Bits per second=115200, Bits=8, Parity=None, Stop bits=1, Flow Control=None
.
4. Log in with the username=
admin
and password=
exinda
.
5. Read and accept the End User License Agreement .
6.
The system automatically starts the
Configuration Jump Start
. Complete all steps.
7.
Click
Save
.
This finished the initial configuration.
For further support, visit https://www.gfi.com/support/exinda-support .