Resolution
PAL: 720x576, 720x288 NTSC: 720x480, 720x240
Frame Rate
1 Camera supports 1~25 fps@ 720x576, 1~25 fps @ 720x288
1 Camera supports
1~30 fps@ 720x480, 1~30 fps @ 720x240
2 Cameras supports 1~12 fps @ 720x576, 1~25 fps @ 720x288
2 Cameras supports
1~15 fps @ 720x480, 1~30 fps @ 720x240
3 Cameras supports 1 ~ 8 fps @ 720x576, 1~12 fps @ 720x288
3 Cameras supports
1~10 fps @ 720x480, 1~15 fps @ 720x240
4 Cameras supports 1 ~ 4 fps @ 720x576, 1~12 fps @ 720x288
4 Cameras supports
1 ~ 5 fps @ 720x480, 1~15 fps @ 720x240
Quality(4 level)
Super (Large file size, but good picture quality)
Low (Small file size, but low picture quality)
Pre Event
Post Event
Pre-record/Post-record time can be set here.
Pre-record time is 5~30sec, if total frame rate is below 8fps @ 720x576 or
10fps @ 720x480.
Pre-record time is 5~25sec, if total frame rate is 12fps @ 720x576 or 15fps
@ 720x480.
Pre-record time is 5~15sec, if total frame rate is 25fps @ 720x576 or 30fps
@ 720x480.
Post-record time is 5~300sec
Overwrite
Overwrite (The image data is overwrites the oldest files when the SD
memory is full.)
One time (The recording stops automatically when the SD memory is full.)
Event Ratio
vs. Panic Ratio
Set the Event data percentage and the Max Number of Panic event data
percentage.
24
Drive Recorder Settings – Resolution & Frame Rate
If you set the event record mode only
: 100% of SD card capacity is for the Event
recording data.
If you set the normal record mode only
:100% of SD card capacity is for the
Normal recording data.
If you set dual record mode or different record modes per camera (i.e. Cam 1
is Event record & Cam2 is Normal record):
Then, for example, 50% of SD card
capacity is for the Event recording data and 50% of SD card capacity is for the
Normal recording data. This % is adjustable by using the scroll bar.
*The total # of Events (including Panic and Event) cannot exceed 1,600.
