Smarty BX3000, Руководство пользователя

Страница: 10 / 47

(70%6+10/#+070+6
Automatic start
Make sure that peripherals include cameras are properly connected.
Turn on the vehicle power BX3000 will be automatically started (Use the
Turn on the vehicle power, BX3000 will be automatically started. (Use the
power cable provided.)
Event record
The Event recording will be started automatically by Alarm1 to 3 or by the G-
Notice : The unit will not start recording immediately after the power is
turned on. It takes around 1 minute for the built-in power backup system
to charge. Thereafter, the internal flash memory will be ready to record.
The Event recording will be started automatically by Alarm1 to 3 or by the G
sensor level.
The Panic recording can be started by pressing the [PANIC] button.
Normal record (Continuous record)
The Normal(continuous) recording will be automatically started after power on.
BX3000 will not make a separate event file during the continuous recording.
It will mark the Event area as ‘Alarm1~3’, G-senor or [PANIC] button in the
continuous recording file which can be easily searched for during playback
continuous recording file, which can be easily searched for during playback.
Dual record (Event & Normal record)
If you set different record modes per camera, like camera1 set as Event record
and camera2 set as Normal record, then camera1(Event record) will work
according to the record setting for example 10frames per second recording.
However camera2(Normal record)will record 1frame per second, if there is no
event. If there is an Event, both cameras will record according to the record
Live screen on Monitor
BX3000 will display the live screen on the monitor.
The camera channel can be changed using the information OSD.
(Refer to page 13)
Playback in the car
setting for example 10 frames per second recording.
Recorded files can be played back in the car.
PC Viewer Software
The software is pre-loaded on the SD card [pcsw] folder.