SmartWitness SWC201S, Руководство пользователя

Страница: 8 / 28

Plan where the receiver will be positioned. Ensure the power adaptor cable and the TV
or Monitor (for viewing) is able to connect back to the receiver unit. The receiver can be
desktop mounted or hung on a wall.
1.
To hang the receiver off the wall, drill 2 holes in the wall and fix 2 screws using the
wall plugs supplied.
2.
Hang the receiver in position.
3.
Connect the Power Cable to the receiver and connect the power adaptor to a Mains
Power supply.
4.
Connect the AV cable to the AV Output of the receiver and connect the other end to
the VIDEO IN (yellow) and AUDIO IN (white) on the ports of your TV or monitor.
CAMERA INSTALLATION
RECEIVER INSTALLATION
Plan where the camera will be positioned. Ensure the power adaptor cable is able to
connect back to the camera. It is recommended the performance of the wireless connection
is verified at the selected location area before the camera is permanently installed.
1.
The system comes with a Camera that has already been paired to the Receiver. If you
are adding a camera to the system, pair the camera with the receiver before installing the
camera. Refer to PAIRING YOUR CAMERA(S) in this manual.
2.
Use the bracket to mark up and drill holes where the camera will be installed.
3.
Drill a hole for the Power Cable to be pushed through.
4.
Mount the camera to the wall using the wall plugs and screws supplied.
5.
Adjust the viewing angle of the camera using the bracket.
6.
Connect the Power Cable to the camera’s trailing lead and connect the power adaptor
to a Mains Power supply.
Feed trailing lead
through the wall
To Mains
Power