CAMERA INSTALLATION
Plan where the camera will be positioned. Ensure that the power adaptor cable is able
to connect back to the camera. It is recommended that the performance of the wireless
connection is verified at the selected location area before the camera is permanently
installed.
1.
Install the software CD enclosed and restart your computer when prompted.
2.
Connect the power adaptor to the camera’s power input on the rear and plug it to a
mains power supply. Then switch on the power.
3.
Connect the USB receiver to your computer and run the application software ‘
WUSB
Camera
’, from the icon on your desktop.
4.
Pair up the camera and receiver, by clicking on the pair ‘
Cruise
’ icon (see page 8 for
icon descriptions) and selecting the camera you want to pair. Press the ‘
Pair
button’
at the
rear of the camera within 10 seconds. The image below shows the procedure for pairing the
cameras:
