SmartWitness CP2 Series, Руководство по установке

Страница: 8 / 12

www.smartwitness.com
4. CP2 Power Adaptor and Wiring

To connect the CP2 lead cable to the power adaptor (DPWR-600), lining up
the arrows on the silver cable connectors and then push together. Twist the
silver plate as shown below to secure the connection.

After Connecting the power cable to the CP2 power lead, lay out the power
cable roughly where it will run once hidden behind the vehicle's interior
panels. This gives you an idea of where to route the cable and how much
slack to leave on the way down to the vehicle’s power source.

Secure the power cable extension into the headliner and down the A-Pillar.
Route the power cable around the side and behind the rest of the interior
panels down towards the fuse box / power source. Make sure the vehicle is
off and then connect the 4 required wires to the vehicle, as shown below in
the wiring diagram.
a. Wiring Harness Diagram
Power Specifications
Input: DC 10~32V, 2A
Output: DC 5V, 3A