Smartwares 281517, Инструкция по сборке, эксплуатации и безопасности

Страница: 12 / 107

14 GB
Now drill the mounting holes (Ø 5 mm). Ensure that you do not
damage the supply line.
Drill an additional hole (approx. ø 18 mm) into the middle of the
three mounting holes.
Feed the camera connecting cable through one of the three cable
guides in the mounting bracket
2
.
Loosen the wing bolt on the mounting bracket
2
and adjust the
viewing angle (see Fig. A2).
Then secure the joint by tightening the wing bolt.
Screw the camera
1
onto the mounting bracket
2
(see Fig. A3).
Feed the camera connecting cable through the bore.
Now insert the wall plugs
5
into the bores.
Secure the mounting bracket
2
to the wall using the screws
6
(Fig. A1).
RJ45
Once the you have turned the camera
1
on the screw in the mounting
bracket
2
so it is connected as tight as possible, turn the triangle
nut in the opposite direction to secure the camera
1
.
Note: For details and more information, please refer to the in-
cluded tutorial CD
4
.