SmartVent Evolve 2, Руководство пользователя, Страница: 32 / 39

32
Troubleshooting
The touchscreen is not responding to touch inputs
1 Check to see if the lock icon on the bottom left of the screen is closed .
2 If it is, press and hold the icon for 5 seconds to unlock .
3 The touchscreen has an automatic screen lock function. Go to the General
Settings section on page 24 for more information about how to adjust this
function.
There is condensation forming on my windows
1 Check that VENTILATION mode is set to AUTO
2 If HEAT TRANSFER is installed, ensure the timer function is utilised to allow
periods dedicated to ventilating your home. See HEAT TRANSFER section
on page 18 for additional information.
3 Test if air is coming out of the diffusers. If not then follow the steps in There
is no air coming out my diffusers below.
4 To increase the velocity of air coming into the room, reduce the diffuser
opening to 5-10mm.
There is no air coming out my diffusers
1 Check that the touchscreen controller is powered on
2 Perform a manual test:
- Set HEAT TRANSFER and HEATER modes to OFF
- Set VENTILATION mode to MANUAL
- Cycle through the fan speeds and check for air coming out of your
diffusers
- Make sure you check EVERY diffuser in the house
- Return your system back to its original settings.
3 If there is no air coming out of at least one of your diffusers during the test,
report the results to your installer.
My house feels colder with this system installed
1 Check your set temperature value in the VENTILATION settings.
2 Ventilation system brings in air from either the roof cavity or outside to
improve the indoor air quality. This air can sometimes be cooler than your
desired indoor temperature. This is normal.