3.2 Power
connections
SmartTablet can be used with both DC and AC power supplies
1. DC
power
Portable DC Power
A separate Lithium-Ion rechargeable battery pack (3600mAH ) is provided with the
SmartTablet which can be attached at the rear side of the SmartTablet.
Note: Battery must be charged fully for 3 hours before first time usage.
Cigar Jack Adapter
It is specially designed for using SmartTablet in automobiles.
Input voltage is 12V (fixed) and Output voltage can be varied (15V, 16V, 18V, 19V, 20V,
21V), but for SmartTablet allowed voltage is 19V.
DC/DC Power supply
It is possible to change the input voltage as per the user requirement. The input voltage
range is (18 ~ 54V variable). Output voltage is 19V fixed.
2.
For AC power
– Use AC/DC adapter/battery charger (100~240 AC input – 19V DC) for
using SmartTablet on AC power. Use a power cord for the connection.
3.3 Power
settings
3.3.1 Power
on
Switch on the SmartTablet using Power key available on top left side of front panel
Power LED (Green) and Hard disk LED (Red) will start glowing
3.3.2 Power
off
SmartTablet can be switched off in two ways
1. Shut down the system from Windows.
- Select
Start
from Taskbar > Select
Shut Down
from Start menu.
- Check Shut Down from
Shutdown
Windows menu > Select
OK
.
2. Changing the function of Power Key.
- Select
Start
from Taskbar > Select
Settings
> Select
Control Panel
.
- Select
Power Management
Icon from Control Panel.
-Select
advanced
tab > Reconfigure Power Buttons setting > Select
Apply
.
Page
14
10/2/2007
