Chapter 3 Power settings and connections
3.1 Getting
Started
There are three ways in which SmartTablet PC can be used or mounted
1. Desktop docking station
2. Vehicle docking station
3. Without any docking station
Desktop docking station
Mounting SmartTablet on desktop docking station follow the steps given below.
•
Mount SmartTablet Web Pad on mounting unit so that the bottom notch fits in the Pin
holder of the mounting unit so as it will look like in the figure below.
•
As per the requirement, connect Power cord to the DC port at the back of the docking
station.
•
Instead of AC/DC adapter SmartTablet can operate on batteries, so please check if the
battery is connected at the rear side of the SmartTablet.
•
Switch on the power button.
•
Connect PS/2 keyboard as well as USB mouse if required.
Docking Station (Desktop)
In order to use SmartTablet in-house following mounting station is available
LAN Port
USB port
PS/2 port
DC Input
Docking
Connector
Page
12
10/2/2007
