SmartSynch GridRouter, Руководство пользователя, Страница: 7 / 61

GridRouter™ User Guide
7
3 Product Overview
3.1 Unit Information
3.1.1 Serial Number
The unit serial number can be found using several different methods. It can be found on the Web
Interface in the top right hand corner as “
Host ”. The number will be in the form of “ 1234f56789 ” with an
“ sgr ” prefix, where the numbers can be any digit.
If the Web Interface is not accessible, the serial number can also be obtained from a label on the main
system board. The label is located to the left of the large black processor heat sink as a 2D barcode with
serial number.
The serial number can be found in the ship file included with the unit. The ship file should have been
provided either in paper form with the GridRouter package, or as an email attachment.
If command line access to the GridRouter is easily obtained, the serial number can be found by executing
“
fw_printenv serial# ”. Refer to the Advanced User Guide for more information on command line access.
3.1.2 Firmware Version
The firmware version can be found on the Web Interface in the top right hand corner or on the Info-
>System page. The version number will be in the form of “
20####-P## ”, where the “ # ” symbol can be any
digit.
The firmware version can also be found in the ship file included with the unit. The ship file should have
been provided either in paper form with the GridRouter package, or as an email attachment.
If command line access to the GridRouter is easily obtained, the firmware version can be found by
executing “
uci show system.firmware.version ”. Refer to the Advanced User Guide for more
information on command line access.
3.1.3 Cellular IP Address
The cellular IP address can be found on the Web Interface on the Status->Interfaces page under WAN.
The IP address could also possibly be found in the ship file included with the unit. The ship file should
have been provided either in paper form with the GridRouter package, or as an email attachment.
If command line access to the GridRouter is easily obtained, the IP address can be found by executing
“
uci show -P /var/state network.wan.ipaddr ”. Refer to the Advanced User Guide for more information
on command line access.