
GridRouter™ User Guide
44
6.3.1.1 Firewall
The Network > Firewall screen allows you to customize port services for common applications. When
users send these types of requests to your network via the Internet, the GridRouter will deny or allow
those requests and, if enabled, forward them to the appropriate devices. Before using forwarding you
should assign static IP address to the designated devices. Refer to the DHCP page, section 6.2.5.6, for
more information on assigning static IP addresses.
Figure 6-
15
2: Network > Firewall
Incoming Ports
Incoming ports are used to allow access to the GridRouter itself, not devices connected to the
GridRouter. An example would be querying SNMP information from the GridRouter. To allow/deny a
single port, enter the information on each line for the criteria required. The IP address “
0.0.0.0
” can be
used to denote any address.
Name:
Specifies the name to give the rule. The name should not have any spaces.
Protocol:
Select the protocol used for this rule, either “
TCP
“,“
UDP
“,“
Both
“
,
or
“
ICMP
“.
Source IP:
Specifies the IP address the request is coming from.
Destination IP:
Specifies the IP address that the request is going to.
Port:
Specifies the external port number. Multiple ports can be specified by using a hyphen and commas:
“
9000-9009,9011,9014-9016
”.
Port Forwarding
Port forwarding is used to allow access to devices connected to the GridRouter. An example would be
accessing a device connected to the Ethernet of the GridRouter. To forward a single port, enter the
information on each line for the criteria required. The IP address “
0.0.0.0
” can be used to denote any
address.
Name:
Specifies the name to give the rule. The name should not have any spaces.
Protocol:
Select the protocol used for this rule, either “
TCP
“ or “
UDP
“, or “
Both
“.
Source IP:
Specifies the IP address the request is coming from.
Destination Port:
Specifies the external port number. Multiple ports can be specified using a hyphen and
commas: ”
9000-9009,9011,9014-9016
”.
To IP Address:
Specifies the local IP address that should receive the requests.
Deleted:
3