6
Operation For Normal Mode:
(Rotary switch in position 0)
Manual:
When switched to Manual Mode the engine room fans will turn On and stay On until
turn Off or placed in Auto Mode.
Off:
All fans Off
Auto:
When placed in Auto Mode and the engine starts the Fans will start after the
programmed “Fan Start Time” (see page 6) both Fans will run in the same direction.
If the Lazz fan is On it will be turned Off and placed in standby mode the Lazz On
LED will be flashing to indicate this, all Lazz times will be saved and suspended.
When the engine is stopped both Fan 1 and Fan 2 will be turned Off for the
programmed “Fan Stop Time” (see page 6) then both Fans will start again but Fan 2
will be reversed. The Fans will stay on until the programmed “Fan Run On Time” (see
page 6) at which time they will both turn Off.
If the Lazz was On and placed in standby, it will now resume its normal operation.
Emergency Stop:
If this input is triggered ALL Fans will be turned Off and the LED will turn On.
Emergency Stop:
If this input is triggered ALL Fans will be turned Off and the LED will turn On.
