3
Emergency Fire Input Setup:
NOTE: Where indicated the Link wire MUST be installed
Jumper:
Input Setup:
Emergency Fire
Select Jumper
This jumper sets the Emergency Input for either a normally open or normally closed input switch.
If the input switch is normally open install the jumper, if normally closed removed the jumper.
Emergency Fire
Stop Input.
Switch
Link
Setup for clean relay contacts.
1
2
3
4
Emergency Fire
Stop Input.
Input
Link
Setup for input switching to + VDC input.
1
2
3
4
Emergency Fire
Stop Input.
Input
Link
Setup for input switching to GND.
1
2
3
4
