SmartStore SM3015, Руководство по сборке

Страница: 8 / 16

fig.3
ASSEMBLE DOOR
7
SMALL DOOR:
•
Assemble small door in same way as large door using 0.495 m top and bottom flashings.
•
Before screwing on 0.955m door braces, attach weather strip flashing to back of door side flashing using six rivets
ensuring it protrudes 20mm out from door side.
SELECT:
3 x 1.940 m Door Sheets (Narrow)
2 x 0.945 m Door Top/Bottom Flashings
2 x 0.495 m Door Top/Bottom Flashings
4 x 1.940 m Door Side Flashings
6 x Hinges
1 x Padbolt Support Flashing
2 x 1.200 m Door Brace Flashings
2 x 0.955 m Door Brace Flashings
1 x 1.940m Weatherstrip Flashing
103 x Rivets
STEP 1:
•
Lay out 2 x door sheets on a flat surface
making sure narrow pans are on the outside.
•
Rivet sheets together ensuring ends are
flush with each other.
STEP 2:
•
Position door side flashings and 0.945m top
and bottom flashings and assemble door as
shown, ensuring narrow face of flashing is on
the front as per fig.1
•
Drill and rivet as per diagram.
STEP 4:
•
On the back of the door, place door braces in posi-
tion as shown in fig.4.
•
Ensure that the top and bottom ends of the braces
are under the door flashings as shown in fig.5 and
opposite ends of the braces overlap in the middle.
•
Rivet door brace flashings onto back of door as
shown. Where possible, rivet from front of door .
STEP 3:
•
Attach hinges to door side flashing using rivets provided.
Ensure hinge is flush with back of door, and 60mm in from
each end as per fig.2.
•
Using six rivets, attach padbolt support as shown in fig.3.
NARROW PANS
fig.2
fig.4
fig.5
Hinges
fig.1