Smartrise KEB-Induction, Руководство для стартапов

Страница: 19 / 20

Drive Startup Manual KEB-Induction
March 5, 2020 ©2020 Smartrise Engineering, Inc. All Rights Reserved Page 11
Appendix 2 KEB Programming Menu
The programming menu is where all manual parameter adjustments are made and can be
accessed at Home > Prog (F3).
The table below lists the Parameter Groups.
Table 2: Parameter Groups
Parameter Parameter Group Description
OS00 - OS22 Operator System Provides general information about the operator and
drive hardware and software. Additionally, the
operator password level is set here which allows for
different access levels.
US02 - US06 Basic Setup
Provides the very basic information needed to
configure the drive, including motor type, control
type, and contract speed.
LI01 - LI20 Inputs: Defines the logic of the inputs and assigns control
functionality to the digital inputs.
LM01 - LM33 Motor Data Defines and displays all relevant motor values and
motor protection settings.
LE01 - LE36 Encoder Data Defines the settings and scalings of the drive
encoders.
LN01 - LN05 Machine Data Defines the machine data, including sheave diameter,
roping ratio, and rated load values.
LS01 - LS55 Speed Profile Adjusts the speed, acceleration, and jerk values
across the elevator run profile.
LL01 - LL17 Tune Parameters Contains the automatic tuning parameters. Here you
can program the system inertia, motor data, and
motor pole positions.
LC01 - LC44 Control Setting Contains advanced adjustment parameters which
affects the motor gains, system inertia gains, pre-
torque, etc.
LT01 - LT13 Timer Parameters Adjusts brake and drive signalling timers.
LP01 - LP08 Positioning Parameters Contains the adjustments needed for the drive.
LX01 - LX18 Special Functions Allows advanced adjustment of the drive and
facilitates function tests of drive components.
CH01 - CH03 Configuration Handling Allows a user to save parameters and default to OEM
settings.
LA01 - LA40 Analog I/O Defines and adjusts the analog inputs and outputs.
LO01 - LO20 Outputs Defines the functionality of the relay and solid-state
drive outputs.