SmartRG SR300n Скачать руководство пользователя страница 52

Страница: 52 / 113

After selecting

Advanced Setup -> Quality Of Service -> QoS Queue Config

, click the button. The following screen will appear to facilitate the

creation of a queue and associate it with an interface.

The individual fields on this screen are defined as follows:

Field Name

Description

Name

A free form text field. Enter an intuitive name for your config.

Enable

Dropdown selection for either enable or disable of a given QoS queue configured on chosen Layer 2 interface.

Note: Only one queue can be defined for any one interface/precedence pair, resulting in a maximum of three queues

per interface.

Interface

Dropdown selection for desired Layer 2 interface to be associated with the defined QoS queue (e.g. eth0, eth4).

The following selections are exposed upon defining an Interface as described above:

Queue Precedence

Dropdown selection for priority value to be associated with QoS queue defined (e.g. 1(SP), 2(SP), 3(SP), 4

(SP|WRR|WFQ)).

Note: Lower value = higher priority

The following selections are exposed only if SP|WRR|WFQ Queue Precedence priority as defined above is selected.

Содержание SR300n

















































































































Результаты поиска

Содержание SR300n

Отзывы:

SmartRG SR300n, Руководство пользователя, Страница: 52 / 113

Результаты поиска

Содержание SR300n

Отзывы: