Installation and Operation
Installing the UPS is as easy as following the steps shown. Be aware the
Power Switch must
be
kept in
the
“ON” position, otherwise, the
UPS
will be
disabled
and
your
equipment will not
be
protected
during
a
power failure
．
1. Inspection
Remove
the
UPS
from
its
packaging and
inspect
it
for
damage
that
may
have
occurred
during
shipping
．
If any
damage
is
discovered, repack the
unit
and
return
it
to
the
place
of
purchase.
O
2. Placement
Install the
UPS
unit
in
any
protected
environment
that
provides adequate
airflow around
the
unit, and
is
free
from
excessive dust, corrosive
fumes
and
conductive
contaminants
．
Do
not
operate
your UPS
in
an
environment
where the
ambient
temperature
or
humidity
is high
．
On
the
other
hand, place
the
UPS
unit
away from
monitor
at
least 8 inches
to
avoid
interference
．
3. Charging
This
unit
is
shipped
from
the
factory
with its
internal
battery
fully charged,
however, some
charge
may
be
lost
during
shipping
and
the battery
should
be
recharged
prior
to
use
．
Plug
the
unit
into
an appropriate
power
supply
and
allow the
UPS
to
charge
fully
by
leaving
it plugged
in
for
at
least 8 hours
．
btain an RMA (Return
Material Authorization) number before returning the unit by calling
1-800-772-7633 or by visiting our website at
www.smartpowersystems.com
/rma.htm
Please inform the transport agency immediately should you find signs of
damage. Please keep the packaging in a safe place for future use.
4
