Page 28 of 32
Chapter 7: The Outlook of RPM Panels
7.1 RPM Front and Back Panels
The rear-panel contains eight NT SERVER PORTS from A-H. These ports provides
controlled shutdown for NT server. (Port A controls receptacle A; Port B controls receptacle
B, etc…)
7.2 RPM LED Table
RPM LED Table
LED
ON
OFF
FLASHING
GREEN
The momentary
switch is disabled
and the output
receptacle is
programmed for
remote control.
The momentary
switch is active and
the receptacle may
be turned on or off
by pressing and
releasing the switch
Pressing and holding the
momentary switch for
three seconds will change
the state from remote to
local control.
RED
The receptacle is on
and providing power
to devices
The receptacle is off
and doesn’t provide
power.
The receptacle has
internal fault.
YELLOW
Indicate the RPM ID
number. The master
one-plugged with
SNMP card, will
display all the
connected RPM ID
numbers
It means the RPM ID
is RPM00.
