Smartpond PCUV9 Скачать руководство пользователя страница 3

PLEASE CALL 1-888-755-4497 BEFORE RETURNING TO THE STORE. 

                      WWW.SMART-POND.COM 

 

2.  Install the bulb into lamp holder (B).  Then reinstall the lamp 

holder and locking ring.  Fig. 2 

 
 
 
 
 
 

 

                                                                                                                                    
                                                                                                                                        Fig. 2   
 

3.  Install the adapter gasket (F), adapter (D), and adapter 

locking nut (E) onto the inlet and outlet of the lamp housing.  
Fig. 3 

 

 

  NOTE: For a proper seal, the parts must be installed in this  
             specific order. 

 
 
 
 
 
                                                                                                                                          Fig. 3 
 

4.  Connect tubing from the outlet of your pump to the inlet of the 

PCUV9.  The adapters included can connect to 1/2-in., 3/4-in. 
or 1-in. tubing.  Note that 1/2-in. tubing is recommended for 
optimum performance.  Fig. 4 

 

 

 

  NOTE: The inlet is marked “IN” on the lamp housing. 

 
 
 
 
 
 
 

 

 

 

                                                                                                                                          Fig. 4 
 
 

5.  Connect tubing to the outlet of the PCUV9.  The other end 

can be connected to a spitter, waterfall, or any other water 
feature for your pond.  Fig. 5 

 
 

  NOTE: The outlet is marked “OUT” on the lamp housing. 

 
 
 
 
 
 
 
 
 
 

                                                                                                      

 

   Fig. 5 

 

 

 

 

 

 

Locking 

ring 

Pump  
(not included) 

Tubing 
(not included) 

PCUV9 

PCUV9 

Connect this 
end to a 
water 
feature. 

D

Submersible 
pump in water 

Содержание PCUV9








Отзывы: