www.smartpartsproducts.com
Page
10
Viewing Pictures
a. Turning the Frame on
Connect your Digital Picture Frame to the AC adapter.
Insert a memory card into the respective slot.
Turn the power switch on. If no action is taken, an
automatic slide show will begin within 30 seconds.
b. Selecting the Mode
The first screen you will see shows the symbols for the
different types of memory cards. Please select the type
that corresponds with the type of card you are using. The
frame should automatically detect the right card format
and highlight it on your screen.
Make the selection by using the ENTER button.
The frame will display 3 folder symbols – you can
navigate from Folder to Folder using the Left / Right
button on your remote control or your frame. To select
your folder please press ENTER.
The Photo Folder
The frame will now preview all the pictures that are on the
card. The frame will display 9 pictures in the preview
mode at a time. You can scroll up and down using the
Page UP and Page DN buttons on your remote control
You can use your cursor buttons on your remote control
or on the Digital Picture Frame to move from one picture
to another.
a. Viewing
a
Picture
Once you select your picture in the preview mode you can
display the full picture by pressing the ENTER button
b. Rotating a picture
If a picture was taken vertically – you can select the
picture and press the Left or Right button on your frame –
the frame will rotate the picture by 90 degrees. Pressing
the Left / Right button repeatedly will allow you to rotate
the picture up to 360 degrees.
