SYSTEM STATUS
The chassis will automatically power up as soon as the PSU is connected.
The fan unit starts at maximum speed for a period of a few seconds
before settling down to a lower speed. After power up, the chassis
initiates the software startup sequence. This phase takes from a few
seconds to one minute. Once the startup sequence is completed the
system is now ready for use.
UNPACK AND CHECK THE CONTENTS
- Power cord (model depends on contry/region)
- 2 x Ethernet patch cord
- RJ45 to DB9 adapter
- 2 x rack bracket
- 2 x rack bracket supports
- 12 x screws
- DCP-Series (DCP-2 chassis, PSU, fan)
- Quick installation guide (this guide)
If any part is missing or damaged please contact the distributor!
1 x
1 x
12 x
2 x
MOUNTING OF THE UNIT
1. Fasten the rack angles, with six screws on
each side of the chassis.
2. Fasten securely the rack bracket supports
with four screws to the back. This will support
the weight of the back part of the chassi.
3. Fasten securely the chassis with four screws
to a 19” rack (rack screws not included).
4. Connect the PSU in the back of the unit to the
power source.
