5. Bike Stand
Line up the stand with the holes near the left drop
out. Slide the bolts in and tighten. This is easier
to do when the stand is open with no weight on it.
6. Pedals
Attach the pedals to the cranks, paying attention
to the “L” or “R” marked on the pedal axles. Note:
the pedals have opposing threads – screw in the left
pedal counterclockwise and screw in the right pedal
clockwise. Install L pedal counterclockwise and the
right pedal clockwise.
2. Assembly Instructions
3. Mudguard
Install the front mudguard and front light on the
fork. Take off the bolt from the front fork, put the
front mudguard hanger mount on the inside or
outside of the fork then put the front light bracket
on. Put the bolt through the fork then fasten the
bolt with a 5mm allen key and 10mm spanner.
Then fasten the two mudguard stays to the forks.
Finally connect the light cable to the front light.
4. Light Connection
Finally connect the cable from the front light to the
cable connection coming out on the underside of
the down tube, making sure the arrows align before
pushing the connectors together.
2. Assembly Instructions
PanerGT user manual.indd 6-7
7/21/2017 3:21:41 PM
