CONFIDENTIAL AND PROPRIETARY
The Information contained in this document shall remain the sole exclusive property of s.m.s smart microwave sensors GmbH and shall not
be disclosed by the recipient to third parties without prior consent of s.m.s smart microwave sensors GmbH in writing.
Getting_started_Guide
I
Page 7
of 16
I
January 30, 2019
Picture 4: Connecting UMRR-8F Type 146 to the cable
To operate the UMRR-8F Type 146 the sensor has to be connected to the cable as shown in
Picture 4, Number 1. The connection to the CAN interface is established by the DSUB9-
connector labeled with “CAN” (2). The pining is
shown in the datasheet
[2]
. The banana
plugs (3) are used to supply power to the sensor, red for supply voltage, black for electrical
ground (GND). The recommended supply voltage is noted within the datasheet
[2].
The
second CAN connection (4) and the automotive Ethernet connector are currently unused.
1
2
3
4
