A standard 2000mAh battery charge takes about 6-8 hours.
High-performance 2000mAh Li-polymer batte
- 7 -
Extensive function*
Built-in QR Code (Optional)
Operating environment
Working temperature: 0
℃
～
70
℃
Relative humidity
≤
90%
Storage and transportation temperature
-40
～
60
℃
EMC
Support
Radio frequency Specification*
Antenna energy output
★
：
Antenna surface magnetic field
strength (Hmax)
≤
7.5A/m(rms)
Electromagnetic field strength at
the 3cm of the antenna surface
normal direction (Hmin)
≥
1.5A/m
rms
Modulation output:
★
Bit rate: 106Kbit/s
fc/128
Modulation Mode: ASK Modulation
Modulation index: 8
％～
14
％
Coding mode: NRZ-L
Subcarrier modulation input:
★
Subcarrier frequency (fs): 847kHz
Modulation subcarrier mode: BPSK
Note: “*” part is optional according to client requirement.
6. About the Battery
ry is installed in the terminal.
(1) Battery Life
Up to 5 hours for continuous work, standby for a week.
(2) Charging Method
Please charge your battery in time when the system battery alarms. A full charge to 100% is
necessary.
(3) Time for Charging
(4) Operating Notice
a. The standby time is measured in an actual environment, but the specific standby time may
vary in different areas. This is due to various factors.
b. A rechargeable battery for the device can charge and discharge hundreds of times, but it will
eventually wear out. When standby times are noticeably shorter than normal, replace the
original battery.
