US SL 608 Outdoor High Lifter - 01/2018
10
Operation of VACUUM function: (page 13)
This function (pos. 5) will switch vacuum on and off. The vacuum pump is controlled
by a vacustat. The pumps have been programmed to stop at -0,62.
The vacuum function is operated by the slide valve and safety pin on top of the
telescopic arm (pos. 5). To activate vacuum, push the slide valve forward (pos. 5). To
release vacuum, pull the safety pin to the left and pull the slide valve backwards.
Control Panel (pos. 32) for arm and yoke: (pages 8, 9, 15)
Users should make a point of reading the function description below, so as to
become familiar with the functioning of the machine.
Smart LIFT is operated manually. This machine generally has four functions which
may be operated individually.
UP/DOWN function:
This function will make the arm move either up or down. The movement is made via
the actuators, (pos. 24).
TILTING function:
This function will make the work turn round. The movement is made by actuator,
(pos. 21).
TELESCOPIC ARM function:
The movement is made via actuator, placed under the lift arm, (pos. 23).
SIDE DISPLACEMENT function:
This movement is performed via actuator, placed between the two front wheels.
(pos. 22).
For max. stability at transport of sucked work, the
suction cups are to be centred and adapted to the
transport work chosen.
Operation of yoke with
sucked work should always be conducted with
caution
