SmartLabs SML-5112W, Руководство пользователя, Страница: 3 / 14

105318, Russia, Moscow, Shcherbakovskaya str., b. 3. Ph.: (495)645-44-56 page
3
of
14
http://www.smartlabs.tv CONFIDENTIAL
Do not expose the STB to vibrations or shaking.
Do not use the STB in dusty environments.
If a storm is coming or if you are not going to use the STB for a long time,
unplug the power cord and disconnect the Ethernet cable. This will help to
protect the unit from lightning and power line surges.
Batteries (battery pack or batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
The mains plug of adapter is used to disconnect device from power supply. The
mains plug of adapter shall remain readily operable.
When using set-top box with a plasma TV, do not put picture on pause for more
than 5 minutes, due to plasma TV screen design it could lead to display
damage. The set-top box manufacturer is not responsible for any damage
caused in such manner.
The software on your STB is updated automatically. Do not unplug the power
cord and do not disconnect the Ethernet cable while the software is updating.
The STB manufacturer is not liable for any consequences of incorrect software
update.
The manufacturer does not guarantee the absence of interference with other
devices. To eliminate possible interference, increase the distance between the
STB and other equipment, or connect equipment using a different setup.
4
Indicators and slots
Front panel
Element Purpose
Power
indicator
Green
—STB is switched on and operates normally.
Red
— STB is in the stand-by mode.
IR receiver The internal IR receiver is accepting signals from the IR remote control
(RC). This element should be in the direct visibility range from the IR