Picture In Picture Connections
1.
Connect a coaxial cable from your VCR ANT OUT to your TV ANT IN.
2. Connect a second A/V cable from TVG to your TV (diagram B)
3. Only the A/V connection will be filtered by TVG.
REAR VIEW (Diagram E)
Filter Setting
Left
off
1
Center Position tolerant filter setting
Rlght Position strict filter setting
Closed-Captioning Setting
L C R
2
Left Position off
Center Posltion displays modified (profanity-free) text only when a foul word is
detected, and the audio is muted.
Right Position displays continuous modified (profanity-free) closed-captioned text
during qualified programs
the filter setting is in either the tolerant or strict position.
Dedicated Closed-Captlon Decoder Mode: When the dosed-captioning setting is in
the right position and the filter setting is in the left (off) position,
displays
continuous unmodified closed-captioned text during all closed-captioned programs.
Channel Setting
UP Position
should be tuned to channel 3 when using coaxial connection.
DOWN
TV should be tuned to channel 4 when using
coaxial connection.
Troubleshooting
No
and sound
check that the wall power supply is plugged in to the electrical outlet, b)
check
that the power supply connection is securely plugged into
c) check
that the AA/
connections in diagram
A
are secure, d) check that the Mono Coaxial connections in diagram A are
secure and your
is tuned to channel 3 or 4 (as selected by the channel setting switch in diagram
C(3)), or e) check that the optional A/V connections in diagram B are secure and
is tuned to
IN.
A
foul word was
not
a)
the program that you are watching is either not closed-captioned,
or the captioning is not syncronized with the audio (live
news,
sports,
talk shows). Either turn the
channel and then turn it back to the
or turn off your VCR and turn it back on again.
not displayed then the program not be filtered,
b) the program is being filtered, but their
are captioning errors (words left out, misspelled or not syncronized with the audio), c) the word is not
in the TVG dictionary, d) the filter setting in diagram
E
is set to tolerant which allows a small number
of offensive words.
FCC NOTE: This equipment has been tested and found to comply with the limits for
a Class digital
device, pursuant to
part 15 of the FCC Rules. These limits are disigned to provide reasonable protection against harmful interference in a
residential Installation. This equipment generates,
and can radiate radlo frequency energy and, if not installed
and
used
In
accordance
the
may cause harmful
to radio communications. However, there is no
guaranlee that interference will not occur in a particular Installation If this equipment does cause harmful interference to
radio or television reception, which can be determined by
the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase
separation between the equipment and receiver.
-Connect the equipment into an outlet on
a
circuit different from that to which the
receiver is connected.
the dealer or an experienced radio/TV technician for help.
