STEP 2: Connect the Monitor
7
TIP:
To exercise without a phone, just follow step 1.
1. The indicator light should be steady
green.
Press the Connect Button.
•
If FLASHING RED:
Not detecting heart rate.
•
If NOT ON:
Press the Connect Button for
a few seconds. If that doesn’t work, press
the Reset Button with a paper clip
(resetting does not erase any data).
2. Open the SmartHRM Mobile App on
your phone and choose CONNECT
• As instructed, press the
Connect Button.
The green light should be a fast blink.
Select “
OK
“.
• “
Please select a serial port connection
”
Choose the SmartHRM connection and
then choose your SmartHRM Monitor.
• When done, tap “
Select
” (bottom left).
3. The green Indicator Light should now be
a slow blink. You are now connected!
8
SmartHRM Bluetooth Heart Rate Monitor
User Guide
SmartHRM Bluetooth Heart Rate Monitor
User Guide
STEP 1: Attach the Monitor
Where to Wear the Monitor
• The heart rate monitor should be worn
in the middle of your chest, as shown
(not on the left side over your heart)
and just below the sternum. For women,
the strap should be positioned below
the bra.
Position and Adjust
• Position and fasten the monitor. The
heart-shaped clip is inserted at an
angle through the underside of the hole:
insert one-half fi rst, then push up the
other half for a smooth fi t.
• Adjust strap for a comfortable but snug fi t.
Moisten Skin
• With a damp paper towel, moisten your
skin and/or the electrodes. Moisture helps
ensure conductivity with the electrodes
that read and transmit your heart rate.
Connect
Button
Reset
Button
(hole)
Indicator
Light
Electrodes
