SmartGyro 106OM405, Руководство по эксплуатации

Страница: 23 / 52

19
PRODUCT OVERVIEW
SG60 Operation Manual
The numerical fields of the Date (day/month/
year) and Time (hours/minutes/seconds) can
be set simply pressing the corresponding sym-
bols “+” and “-“ placed above and below the
numbers.
Once the date and time are set, data are saved
into the non-volatile memory of the gyro’s Con-
trol Box by pressing the uppermost icon at the
bottom right angle (Figure 19, (3)).
Pressing the central icon (Figure19, (4)) saves
the time and data into the non-volatile mem-
ory of the display.
Finally, pressing the bottom-most icon (Figure
19, (5)) discards the data and shows on the
screen the current date and time read from the
internal Real Time Clock of the gyro’s Control
Box.
Note
- More gyros (and displays) can be connected
to the same CAN bus.
In this case, setting the date and time
on one display affects all the connected
gyros, if these are properly connected and
powered; i.e. the new date and time are
sent to all the connected gyros, so that one
programming only is needed to set all.
It may happen, however, that for any reason
some gyros are not operative (for example,
not powered).
The current status of the stabilizers is shown
on the bottom left of the page.
In this example only gyros n°1 and 2 are re-
sponding (gyro 3 has a red anomaly mark).
Therefore the new date and time will only be
set on gyros 1 and 2.
Pressing the Home icon on the top right cor-
ner (Figure 19, (1)) will return you to the Home
page.
Pressing the Back icon on the top right corner
(Figure 19, (2)) will return you to the Settings
page (Figure 18).
“LANGUAGE” option
Two languages are currently available:
- Italian
- English
Selection is made by pressing the correspond-
ing flag icon.
“UNIT OF MEASURE” option
With the “UNITS OF MEASURE” option, it is pos-
sible to select between International System of
Units (MKS) and imperial units (UCS).
Figure 20
Figure 21