SmartGyro 102OM405, Руководство по эксплуатации

Страница: 31 / 52

27
SG20 Operation Manual
GYRO STABILIZER OPERATION
Gyro Stabilizer Startup and Stabilization
1. Ensure that both the AC power and DC
power lines are connected to the gyro
system.
2. Switch on the protection break-
ers on the DC and AC power lines.
It may happen that if the DC power is
turned on before AC power, the system
will detect an AC power absence fault.
However, this disappears as soon as AC
power supply is supplied.
Figure 1
Figure 2
Note:
- When the control display is powered on, a
splash screen will appear (Figure 1); after
about 40 seconds, the Home page will be
displayed on the screen (Figure 2).
- If an anomaly is detected, it is signaled by
the presence of a red icon on the bottom
left corner (see Figure 3)
Figure 3
- For information about displayed anomaly
messages and how to handle them, see
“TROUBLESHOOTING” on page 38.