Smartgen HAT700 SERIES, Руководство пользователя

Страница: 23 / 51

HAT700 SERIES ATS CONTROLLER USER MANUAL
HAT700 Series ATS Controller 2018-12-13 Version 1.5 Page 23 of 51
No. Item Range Default Description
delay begins, after the start delay has
expired, start signal will be initiated.
2 Gen Stop Delay (0-9999)s 5
When the genset is ready to stop, stop delay
begins, after the stop delay has expired,
stop signal will be initiated.
3 Gen-Gen Start Mode (0-2) 0
0: Cycles Gens
1: Master-Slave Gens
2: Balance Gens Hours
3: Not Used
4 S1 Cycles Work Time (0-9999)min 720 Gens cycle start S1 running time.
5 S2 Cycles Work Time (0-9999)min 720 Gens cycle start S2 running time.
6 Genset Available Time (0-9999)s 120
When the start signal is active, the start
delay will be initiated. If the gen voltage lasts
abnormal after the delay has expired,
“Genset Fault” alarm will be initiated.
7 Battery Volt Enable (0-1) 0 0: Disable ; 1: Enable
8 Battery LV Warn (0-1) 0 0: Disable ; 1: Enable
9
Battery Under Volt Set
Value
(0-100.0)V 10.0
“Battery Under Volts” alarm will be initiated if
the battery voltage has fallen below the set
value.
10
Battery Under Volt
Return Value
(0-100.0)V 10.5
“Battery Under Volts” alarm will be removed
if the battery voltage has exceeded the set
value.
11
Battery Under Volt
Delay
(0-3600)s 60
If the battery voltage has fallen below the set
value, “Battery Under Volts” alarm will be
initiated after the delay has expired.
12 Battery OV Warn (0-1) 0 0: Disable ; 1: Enable
13
Battery Over Volt Set
Value
(0-100.0)V 30.0
“Battery Over Volts” alarm will be initiated if
the battery voltage has exceeded the set
value.
14
Battery Over Volt
Return Value
(0-100.0)V 29.5
“Battery Over Volts” alarm will be removed if
the battery voltage has fallen below the set
value.
15
Battery Over Volt
Delay
(0-3600)s 60
If the battery voltage has exceeded the set
value, “Battery Over Volts” alarm will be
initiated after the delay has expired.
Scheduler Config
1 Schedule Gen Enable (0-1) 0 0: Disable ; 1: Enable
2 Schedule Load (0-1) 0
0: Off Load
1: On Load
3 Schedule Period (0-2) 0
0: Monthly
1: Weekly
2: Daily
4 Schedule Monthly (1-31) 1 The date of start the genset
5 Schedule Weekly (1-127) 1
Bit0: Sunday
Bit1: Monday