Smartgen HAT700 SERIES, Руководство пользователя

Страница: 13 / 51

HAT700 SERIES ATS CONTROLLER USER MANUAL
HAT700 Series ATS Controller 2018-12-13 Version 1.5 Page 13 of 51
7.2 STATUS DESCRIPTION
7.2.1. S1 VOLTAGE STATUS
No. Item Description
1 S1 Available S1 Normal Delay
2 S1 Unavailable S1 Abnormal Delay
3 S1 Available Power supply voltage is within the setting range.
4 S1 Blackout Voltage is 0.
5 S1 Over Volt Voltage is higher than the set value.
6 S1 Under Volt Voltage has fallen below the set value.
7 S1 Over Freq Frequency is higher than the set value.
8 S1 Under Freq Frequency has fallen below the set value.
9 S1 Loss of Phase Loss of any phase of A, B and C.
10 S1 Phase Seq Wrong A-B-C phase sequence is wrong.
7.2.2. S2 VOLTAGE STATUS
No. Item Description
1 S2 Available S2 Normal Delay
2 S2 Unavailable S2 Abnormal Delay
3 S2 Available Power supply voltage is within the setting range.
4 S2 Blackout Voltage is 0.
5 S2 Over Volt Voltage is higher than the set value.
6 S2 Under Volt Voltage has fallen below the set value.
7 S2 Over Freq Frequency is higher than the set value.
8 S2 Under Freq Frequency has fallen below the set value.
9 S2 Loss of Phase Loss of any phase of A, B and C.
10 S2 Phase Seq Wrong A-B-C phase sequence is wrong.
7.2.3. GENSET STATUS
No. Item Description
1 Genset Start Delay Delay time before genset start
2 Genset Return Delay Delay time before genset stop
3 Scheduled Not Work
When scheduled not run is active, its duration time will be
displayed.
4 Scheduled Work When scheduled run is active, its duration time will be displayed.
5 Gen1 Cycle Run
S1 cycle run countdown will be terminated when cycle start is
active.
6 Gen2 Cycle Run
S2 cycle run countdown will be terminated when cycle start is
active.
7 S1 Genset Working
Active when system type is “S1 Gens S2 Gens”.
8 S2 Genset Working
Active when system type is “S1 Gens S2 Gens”.
9 Genset Working Genset start signal output.
10 Genset Standby There is no start genset signal output.