Smartgen HAT552 Скачать руководство пользователя страница 9

Страница: 9 / 35

HAT552/HAT553 DUAL POWER ATS CONTROLLER USER MANUAL

HAT552/HAT553 ATS Controller 2020-05-14 Version 1.1 Page 9 of 35

6.2

INDICATOR DESCRIPTION

Table 5 Indicator Description

Indicator Name

Indicator Description

Alarm Indicator

Slow flashing for warning alarms ( 1time per second);

Fast flashing for fault alarms ( 5 times per second)

Auto Mode Indicator

Light on when current is Auto mode;

Manual Mode Indicator

Light on when current is Manual mode;

A Power Indicator

Always light on when A AC power is normal; flashing when it is

abnormal; light off when it is outage.

A Power Close Status Indicator

Light on when A power switch auxiliary contact is active; light off

when it is inactive;

B Power Close Status Indicator

Light on when B power switch auxiliary contact is active; light off

when it is inactive;

B Power Indicator

Always light on when A AC power is normal; flashing when it is

abnormal; light off when it is outage.

6.3

KEY FUNCTION DESCRIPTION

Table 6 Key Function Description

Key

Function

Description

Manual Key

Transfer to Manual mode (HAT552);

Auto Key

Transfer to Auto mode (HAT552);

Manual/Auto Key Transfer to Manual or Auto mode (HAT553);

A Close Key

Active in manual mode;

Press and A power switch closes; load is supplied by A power;

Open Key

Active in manual mode;

Press and load is disconnected (HAT553);

B Close Key

Active in manual mode;

Press and B power switch closes; load is supplied by B power;

Set/Confirm

In main screen, press and it enters menu interface;

After entering menu interface, confirm key can move the cursor and

confirm the set information;

Down/

Lamp Test Key

In main screen, press and scroll down the screen display;

After entering menu interface, it can move down the cursor or decrease

the value where the cursor is;

In main screen, pressing longer is lamp test; when lamp test is done,

LCD backlight is illuminated, LCD displays all dark and all LED

indicators on the panel are illuminated.

NOTE:

Press

and

simultaneously to set backlight on always; Again press both simultaneously or power on

afresh to cancel backlight on always.

Содержание HAT552




































Результаты поиска

Содержание HAT552

Отзывы:

Бренды по названию

Популярные бренды

Smartgen HAT552, Руководство пользователя

Результаты поиска

Содержание HAT552

Отзывы:

Бренды по названию

Популярные бренды