DIN16A DIGITAL INPUT MODULE USER MANUAL
DIN16A Digital Input Module Version 1.0 2017-04-15 Page 8 of 12
No.
Contents
Description
15
Override mode
Places the generator into its override mode; in override
mode only overspeed shutdown and emergency shutdown
will stop the engine.
16
Emergency stop
The controller shuts down the engine immediately and
records occurrence time.
17
Panel lock
All
buttons
in
panel
is
inactive
except
for
and
is shown on the right of the
first line in LCD status page.
18
Reserved
19
Power Change
Transfers from main battery to standby battery.
20
Raise Speed Aux. input
Raise speed relay will disconnect when the input is active.
21
Reserved
22
Drop Speed Aux. input
Drop speed relay will disconnect when the input is active.
23
Water Heating feedback
The feedback signal of water heating output; The screen
displays
Water Heating feedback
when the input is active.
24
Pre-lube feedback
The feedback signal of Pre-lube output; The screen
displays
Pre-lube feedback
when the input is active.
25
Charging feedback
The feedback signal of Charging output; The screen
displays
Charging feedback
when the input is active.
26
Reserved
27
Reserved
28
Quick start
Cranking will start directly (without preheating) when the
input is active.
29
Reserved
30
60Hz Select
Frequency selection of ECU engine
31
Turning Chain
Start inhibition when the input is active.
32
cylinder Scavenging
Starter relay outputs when the input is active.
33
Reserved
34
Self-inspection
Inspect each warning point without crank genset when the
input is active.
35-50
Reserved
