If you set the time zone one time, you can set the correct local time easily by changing the location
into where you are.
3.7 Power Configuration
To adjust power management settings,
Tap Start > Settings > Control Panel > Power
Use this control panel to check the gauge of the
battery or to change the Power settings.
Battery Tab
Battery tap: It shows the power remained in the main
battery and the backup battery.
To exit, press OK from the command bar, or press
the
<Enter>
key on the keypad.
Figure 6. Battery status
3.8 Schemes Tab
It allows you to determine the entry time of user’s idle
mode, system idle mode, and suspend mode while
using either main battery or AC power. This will
helps you to save more power, if you have to move
repeatedly on your work.
To exit, press OK from the command bar, or press the
<Enter>
key on the keypad.
Figure 7 . Schemes Tap
3.9 Memory Allocation
To adjust the Memory Allocation as following steps:
1.
Tap Start > Settings > Control Panel
> System Properties
2. Seletc the Memory tab.
3. Move the slider to adjust memory allocation.
Default storage Memory is normally set to about
8 MB.
4. Press the OK button, or the
<Enter>
key on
the keypad.
Figure8. Memory Allocation
SMARTAT-870 User Reference
16
