Smarter ST-GP9750EB, Руководство пользователя

Страница: 20 / 27

20
©2012 Smarter Tools, Inc. All Rights Reserved
Owner’s Manual
Inspection, Cleaning, and Maintenance
_______________________________________________________________________________________
The owner/operator is responsible for all periodic maintenance.
WARNING!
MAKE SURE THE ENGINE POWER SWITCH IS IN ITS “OFF” POSITION. DISCONNECT THE
SPARK PLUG WIRE AND ALLOW SUFFICIENT TIME FOR THE ENGINE AND GENERATOR
TO COMPLETELY COOL BEFORE PERFORMING ANY INSPECTIONS, MAINTENANCE, OR
CLEANING.
•
Before each use, inspect the generator. Check for:
-
Loose screws
-
Misaligned or binding moving parts
-
Cracked or broken parts
-
Damaged electrical wiring
-
Any other condition that may affect safe operation.
•
If an engine problem occurs, have it checked by a qualified service technical before further use. DO
NOT use damaged equipment.
WARNING!
NEVER OPERATE A DAMAGED OR DEFECTIVE GENERATOR.
•
Before each use, make sure the engine’s oil level is at manufacturer’s specification. If necessary, fill
the crankcase until the oil level is even with the oil fill hole. Make sure there is gas in the unit.
•
Before each use, remove all debris with a soft brush, rag, or vacuum.
•
Lubricate all moving parts using a premium quality, lightweight machine oil.
CAUTION:
DO NOT ATTEMPT TO ADJUST, MODIFY, OR DISABLE THE FACTORY INSTALLED
GOVERNOR. TAMPERING WITH THE FACTORY SET GOVERNOR WILL VOID YOUR
WARRANTY.
Note:
Complete all scheduled maintenance in a timely manner. Routine maintenance will ensure
years of satisfying service out of your product
Changing Oil
Change oil when the engine is warm. Use SAE 10W-30 grade engine oil.
1. Remove the oil drain plug with a 17 mm socket and extension.
2. Allow the oil to drain completely.
3. Replace the drain plug.
4. Remove oil fill cap/dipstick to add oil.
5. Add approximately 1 quart of engine oil and replace oil fill cap/dipstick.
6. Dispose of used oil at an approved waste management facility.