Smarter ST-GP9750EB, Руководство пользователя, Страница: 15 / 27

15
©2012 Smarter Tools, Inc. All Rights Reserved
9750 Generator
Installation (cont’d)
_______________________________________________________________________________________
Wheel and Handle Kit Installation
(Installation requires a socket wrench with 10mm, 14mm, and 17mm sockets).
1. Before adding oil or gasoline
to the engine, tip the
generator slowly so that the
recoil and air filter are up.
2. Install the two wheels on the
generator using the (2) 17mm
2 ½” bolts provided. Make
sure the valve stem is facing
outward.
3. Tip the generator slowly so
that the recoil and air filter are
down.
4.
Install the crutches on the
under frame with the (4) nuts
and 14mm 1” bolts provided.
5. Tip the generator slowly so
that is sits on both the wheels
and crutched.
6.
Install the Handles on the right
side of the frame using the (2)
nuts and 10mm 1 ¾” bolts
provided.
Support and Mounting
Mount the generator on a concrete slab capable of supporting the weight of the generator. The slab must
extend on all sides beyond the frame by at least one foot. Contact a cement contractor for slab specifications
if necessary. Attach the frame to the concrete slab using 3/8” diameter expansion anchor bolts (not supplied).
Grounding
Note:
It is recommended that only a trained and licensed electrician perform this procedure.
Connect a #8 AWG grounding wire (not included) from the ground connector on the generator to
a grounding rod (not included) that has been driven at least 24 inches deep into the earth. The
grounding rod must be an earth-driven copper or brass rod (electrode) which can adequately
ground the generator.