Longo programmable controller LPC-2.CR1
2 DESCRIPTION
LPC-2.CR1 RFID reader is intended to be used as an identity verification device for room, office or
other indoor entrance.
When RFID tag (key-card) is approached to the reader and its code is successfully read out, the
green LED blinks and a short beep is generated. In case key-card for correspondent room is valid, the
green LED blinks again and a short beep is generated. Other devices can be activated at this event
like door lock opening, turning light on... If key-card number is not valid, the red LED blinks and a
longer beep is generated.
Functionalities are controlled from MCU. Controller is accompanied with Smarteh IDE application. It
is a tool, where various modules can be put together to a configuration, based on number and type
of electrical signals needed. Smarteh IDE takes care for proper modules position. Latest Smarteh IDE
setup can be downloaded from Smarteh web page support section:
www.smarteh.si/Support/Downloads/Software/Development_tools
LPC-2.CR1 module can be modified on customer request: custom front label, push buttons added,
LEDs added. For more information please contact manufacturer.
2
