Smarteh LBT-1.B01, Руководство пользователя

Страница: 19 / 22

Longo Bluetooth Products LBT-1.B01
6.SYSTEM OPERATION
LBT-1.B01 window / door sensor detects magnet position movement and according to presence of
the sensor, sends to main control device LPC-3.GOT.012 status Open/Close in approx. 1 sec delay.
Beside Open/Close status, LBT-1.B01 window / door sensor also sends battery voltage and S2 vandal
switch alarm status.
6.1.Error codes
In case of LBT-1.B01 window / door sensor malfunction or communication error with main control
device, corresponding message is shown on main control device LPC-3.GOT.012. Error codes cannot
be acknowledged on the main control device, but they are shown as long as the errors are active
and will disappear automatically once normal operation is reached back.
Error Reason Solution
Open/Close
status doesn't
work
•
Communication lost
•
Magnet is not aligned correctly with a
sensor
•
Check interference warning in the
section below.
•
Align magnet correctly with a sensor
and gap between should also not be
bigger than 5mm.
Provisioning
failed
•
LBT-1.B01 window / door sensor is not
able to connect to main control device
LPC-3.GOT.012
•
Too large distance, out of range
• BLE RF chip failure
•
Check and adjust settings and restart
the pairing process with provisioning
tool
•
Decrease the distance between LBT-
1.B01 window / door sensor and LPC-
3.GOT.012
Communication
lost
•
The current connection to the LPC-
3.GOT.012 is not available any more
• Too long distance, out of range
•
Check the power supply (battery)
• Decrease the distance
• No new pairing is needed while
devices will be automatically
connected, once available back to the
Bluetooth Mesh network
6.2.Interference warning
Common sources of unwanted interference are devices that generate high frequency signals. These
are typically computers, audio and video systems, electronics transformers, power supplies and
various ballasts. The distance of the LBT-1.B01 window / door sensor to the above mentioned
devices should be at least 0.5m or greater.
WARNING:
•
In order to protect plants, systems, machines and network against cyber threats, necessary
to implement and continuously maintain up to date security concept.
•
You are responsible for preventing unauthorized access to your plants, systems, machines and
networks and they are allowed to be connected to Internet only, when security measures like
firewalls, network segmentation, … are in place.
• We strongly recommend the updates and usage of latest version. Usage of version that are no
longer supported may increase the possibility of cyber threats.
15