120621-XE3243EO-0831-V2.1-V2a
4
1.6 Camera Overview
1. Switches & Connectors
■ DI / DO Port:
(1)
IO
(2)
IO
(3)
ALM-RST (Alarm Reset):
The system will force the alarm input to cancel.
(4)
ALM-IN (Alarm Input):
When activate, the alarm input will be triggered.
(You may also set the alarm to input while the DAY/NIGHT Mode is activated.)
(5)
ALM-OUT (Alarm Output):
When activate, the alarm output will be triggered.
(You may also set the alarm to output while the DAY/NIGHT Mode is activated.)
(6)
GND (Ground)
(7)
RS-485(
－
) Output:
Controlled by RS-485 signal sent by the network part (NEGATIVE)
(8)
RS-485(
＋
) Input:
Controlled by RS-485 signal sent by the network part (POSTIVE)
■Heater:
This heater will keep the lens and glass free of obscuring condensation. The built-in thermostat
switches the heater on and off appropriately.
Audio Out
Reset Switch
LAN / PoE (RJ-45)
Power 12V DC
Heater
Audio In
DI / DO
Video Out
