120110-XE3423NEO-0475-V2.0-V1a
5
4. Rear View
■
Function Switch:
(1)
STATIC IP:
Fixed IP (2)
DHCP:
DHCP Floating IP
(3)
DC IRIS:
Auto IRIS (DC Driver Lens) (4)
AES:
Fixed Lens
■
Power / LAN LED:
(1)
Power LED:
Green
—Normal
Orange
—Abnormal
(2)
LAN LED:
Green
—Successfully Connected
Red
—Connecting
Orange
—Error
■
DI / DO Port:
(1)
ALM-RST
(Alarm Reset)
:
The system will force the alarm input to cancel.
(2)
ALM-IN
(Alarm Input)
:
When activate, the alarm will be triggered. (You may also set the
input controlled by DAY/NIGHT program.)
(3)
ALM-OUT
(Alarm Output)
:
Triggered when the alarm outputted (TTL Level). (You may also
set the alarm to output while the DAY/NIGHT Mode is activated.)
(4)
GND
(Ground)
(5)
RS-485(
－
) Output:
Controlled by RS-485 signal sent by the network part (NEGATIVE).
(6)
RS-485(
＋
) Input:
Controlled by RS-485 signal sent by the network part. (POSTIVE)
■
RESET:
Press reset key with small screw driver, hold for a few seconds, and re-connect the power, the
camera will automatically start to reset in 5 seconds. After reset, all the settings will restored to
the default. The default IP is 192.168.1.168. After reset, IP will be restored to the default.
■
DC 12V:
DC Jackψ2.1, DC12V---0.5A or higher.
■
YPbPr/Audio:
For connecting with audio/video cable.
Green:
Y /
Blue:
Pb /
Red:
Pr /
White:
Audio
LAN / PoE
(RJ-45)
Power 12V DC
Micro SD /
SDHC
Mini USB
DI / DO
Audio/Video
Out
Function Switch
Reset Switch
Video Out
(BNC)
Power / LAN
LED
