Electric charging station WBSH1-7
User manual and data sheet
15
iOS
ANDROID
•
Open the ESPTOUCH application, select the desired internet network and enter the password.
•
Press and release the emergency button 3 times until the
LED will start flashing quickly. The charging
station will now have entered the Wi-Fi configuration mode.
•
Click the "Confirm" button on the smartphone.
•
The charging station will start the automatic configuration of the Wi-Fi network. The connection of the charging
station to the Wi-Fi will be successful when the LED
it will stop flashing and stay on steady.
NOTE!
To complete the configuration procedure correctly, the charging station and the smartphone must be in the same
coverage area as the router.
Parameter configuration
Note:
The WBSH1-7 charging station can be configured using a laptop or smartphone connected to the Internet. For a
correct configuration follow all the steps below.
•
Put the laptop/smartphone in Wi-Fi search mode. Subsequently, the charging station will set itself up in Wi-Fi
access point mode, allowing access to the configuration of the parameters.
•
Connect your laptop / smartphone to the Wi-Fi signal transmitted by the charging station.
Note:
The association to the Wi-Fi network does not require a password to connect to the charging station.
•
Start the browser and enter the address 192.168.4.1 in the address bar, then you will have access to the
configuration.
Note:
Do not Google the address, otherwise the procedure will fail.
