Zone thermostat for 2-pipe fancoil with 0-10 Vdc fan regulation and
valve management
User manual
3
1.
Remove the steel frame from the device and fix it to the junction box with two screws.
2.
Insert all wires into the appropriate terminals and tighten the screws. The wiring
diagram is shown below.
3.
Attach the wired device to points "A" of the steel frame as shown in the image, then
push it into the junction box.
4.
Check if the device is secure and switch on.
Wiring Diagram
Buttons and Display
1.
Temperature settings
2.
Room temperature
3.
Heating
4.
Valve
1
2
3
4
Auto
Lento
Medio
Veloce
