6
FRONT PANEL CONTROL
Front Panel Buttons
Figure 6-1
To lock the front panel buttons and avoid any accidental changes, press ESC + MENU + ENTER + SWITCH
at the same time. The display will indicate that it is locked. Repeat the procedure to unlock the front
panel.
Front Panel Display
Figure 6-2
Default Display:
During normal operation, you will see a list of ports on the front panel display.
To assign an output to an input, press SWITCH. A blinking block cursor will appear. Use UP and DOWN to
select the input that you would like to assign. Once the cursor is over the desired input port, press ENTER
to enter editing mode. Press UP and DOWN to select the output port. Once you have selected an output,
press ENTER to save the configuration. To escape from editing mode, press ESC.
